Gen5Alive staff is proud to offer the following services for headlights listed below
1. Headlight conversion for H.I.D lighting system, Typically $110-189.99 USD for conversion.
- Option A. Plug and play HID conversion kitsThese kits can be fitted into any headlight housing and the installation can be performed by even a novice installer. There is no need to ship us the headlights you currently use and the downtime for your vehicle is left to a very minimum.
- (2) Ballasts
- (2) HID Bulbs
- (2) Wiring harness, May or may not include relay kit
- (1) Set of installation instructions
- (2) Sets of mounting hardware
Purchase these kits here!
- Option B. Complete retrofit for D2S/D2C H.I.D use. Typical pricing for labor is about $255 USD
This type of service is a very involved process which will require you to send us your headlights and sourced parts for this process (We do not readily supply projectors but can upon request). The turnaround time for this service is 36-72hrs from the time we receive your headlights and all parts.
What this type of service entails is a complete teardown of your housings, HID Projectors are then installed and mounted in your housings, then aimed and rotated for perfect fit and finish. Any bezel that is supplied will be adjusted (if needed) to fit and used in the process of the project or our staff can make one for you at an affordable cost. Custom painting can be done (at no additional fee) and in some cases staff can even wrap parts of the project in 100% real carbon fiber (Fee may apply). Lastly Housings and lenses are then scrubbed for oxidation removal and then resealed and assembled to be shipped to you.
Note; Gen5alive can supply bulbs/ballasts/ignitors for an additional fee ($160 additional)
Examples of our work thus far with customer testimonials can be found below:
1. TYC Headlights (Discontinued by TYC) with a TSX Retro for xshigeox
Discussion here
2. DEPO JDM Style headlights with TSX retro and crossfire bezel for bigjoe53
Discussion here
Took these...
and made it into these
With this output (Wall at 10ft)
3. OEM Headlights with TSX retro for Jhwee with custom bezel
Discussion here
Took these...
and made them do this
More pics coming for this project as current images of completion not available
2. Headlight modification via custom painting, 55.00 USD.
- Option A. JDM Style black housing modification
This type of conversion will allow you to retain critical light reflective surfaces needed while offering your vehicle a more aggressive visual appeal. "JDM Style" visual appeal without the expensive cost! (Real JDM Headlights shown below for example purposes)
This type of service is a fairly quick process which will require you to send us your headlights. Headlights are modified according to your request and are also scrubbed to remove oxidation or dirt that may have accumulated from the years of use on your vehicle. The turnaround time for this service is 24hrs from the time we receive your headlights and return shipping takes place via USPS Priority mail for 2-3 day delivery back to you. Headlights are carefully masked off and sprayed with our specialized high temperature coatings to ensure long life and highest visual appeal possible.
For owners of DEPO JDM Style corners we can help to closely match up the coating so that there is little contrast between the housing and corner for higher visual appeal.
- Option B. JDM Yellow highbeam modification, $35 USD
This type of conversion will allow you to retain critical light reflective surfaces needed while offering your vehicle a more unique visual appeal. "JDM Style" visual appeal without the expensive cost!
This type of service is a fairly quick process which will require you to send us your headlights. Headlights are modified according to your request and are also scrubbed to remove oxidation or dirt that may have accumulated from the years of use on your vehicle. The turnaround time for this service is 24hrs from the time we receive your headlights and return shipping takes place via USPS Priority mail for 2-3 day delivery back to you.
Gen5Alive staff is proud to offer the following services for polished parts listed below
1. Plastic lens and garnish restoration, typically between $20-200 USD per item
- Option A. Garnish restoration, Priced per piece
Restoration of dark OEM finish for exterior garnishes (Sedan only) or rear bumper sidemarker garnish (black piece). This process will also remove oxidation that has occured and will be good for years to come, this process also offers a free return shipping via USPS Priority mail.
Contact us here for this service
- Option B. Lens scratch removal, Cost varies depending upon location
Restoration of clear lens and deep red finish for your tail lights. This process also removes oxidation or dullness that has occurred over the years. This service is offered with advance shipping via core charge so you have no down time, Simply receive a pair already done and ship us back your existing tail lights.
Contact us here for this service
- Option C. Headlight oxidation and/or haze removal
Restoration of clear lens for headlights which may have yellowed or become hazy, this process will also removes light scratches in the headlight lens as well. This service may be offered with advance shipping (Depending on location and quantity in stock) via core charge so you have no down time, Simply receive a pair already done and ship us back your existing tail lights, Inquire if this is available for your area.
Contact us here for this service
2. Valve cover polishing, typically between $50-150 USD per item
Full polished, Priced per piece
Removal of all valve cover paint and debris, removal of scratches and polish to near mirror shine. This process will also remove oil, grease or other undesirables from the valve cover and then clear coated (after polishing) to ensure shine for years to come.
Letter shaving is optional in addition to this process (Removal of VTEC, H Emblem, or 16 valve lettering)
Contact us here for this service
3. Engine bay component polishing, priced per piece
Full polished, Priced per piece
Removal of all coating paint and debris, removal of scratches and polish to near mirror shine. This process will also remove oil, grease or other undesirables from the engine piece and then clear coated (after polishing) to ensure shine for years to come.
Contact us here for this service
Gen5Alive staff is proud to offer the following services for custom painting listed below
1. Valve cover painting, typically between $45-55 USD per item (after rebate)
- Option A. Custom high gloss paint, Priced per piece
Removal of OEM paint or wrinkle finish and polished to dull shine, Then our high temp custom coatings are applied which can withstand up to a maximum of about 500 deg farenheit!
Finishes are available in a variety of high gloss metallic anodizing colors such as; Blue, Red, Green, Yellow, Purple, Orange, and Gunmetal/Smoke.
Once coatings are applied a high temp clear coating is also applied to ensure years of enjoyment to come!
Color samples are shown below (Actual appearance may be dulled by camera used) for what is limited on hand at the time of photography, All finishes have metallized appearance in the coating itself for a unique and sparkling finish!
Candy apple red
Electron blue
Gunmetal / Smoke (May appear heavily dulled, actual coating is very unique much like gunmetal)
F22B1 Valve covers are priced at $85.00 plus shipping, A valve cover will be done and shipped to you in advance. Upon receiving the finished cover, place your original one back in the box and ship it back to us to receive a $30.00 rebate!
F22B2 Valve covers are priced at $75.00 plus shipping, A valve cover will be done and shipped to you in advance. Upon receiving the finished cover, place your original one back in the box and ship it back to us to receive a $30.00 rebate!
- Option B. Custom engine component painting, Cost varies depending upon location
Removal of OEM paint or finishes if present, polished to level all surfaces to dull shine and then sprayed with our high temp coatings for a show winning finish!
Finishes are available in a variety of metallic anodizing colors such as; Blue, Red, Green, Yellow, Purple, Orange, and Gunmetal/Smoke.
Once coatings are applied a high temp clear coating is also applied to ensure years of enjoyment to come!
Can include parts such as:
- Fusebox covers
- Brake reservoir or clutch reservoir covers
- Oil caps
- Radiator caps
- Pulleys
- Intake pipe kits (Note, Mount kits must be included when sending to us)
Contact us here for this service
Gen5Alive staff is proud to offer the following services for installations listed below
Gen5Alive staff is proud to offer the following services for your tail lights listed below
- Option A. Amber shield removal, Priced per piece
JDM Style tail lights, the way the Accord should have come from the factory! Complete removal of amber diffuser in the tail lights for that half red/half clear look. This offers a much cleaner style for your car while also retaining factory type of harnesses and using as little modification as possible.
- Option B. Tail light scratch and dullness removal, Cost varies depending upon location
Restoration of clear lens and deep red finish for your tail lights. This process also removes oxidation or dullness that has occurred over the years. This service is offered with advance shipping via core charge so you have no down time, Simply receive a pair already done and ship us back your existing tail lights.